You are not logged in.

The 1st Filipino PC Modding Site

#9 2009-10-23 11:02:12

sunny
Master Modder
From: Binan, Laguna
Registered: 2007-07-18
Posts: 30
Website

Re: Project: Project: Satella DQ-v2 (extended mod version)

As I was surfing the internet for more info about satellite, I found out majority of them carries at least 2 to 3 antennas of different function ( a dish, a long straight RF and mixed).

I'll be doing the RF one first...
2005666350053927514S600x600Q85.jpg
along with the sketchup, an excess household power line router, defective radio antenna and a broken bended metal rods from a child playchair.

2211010280053927514S600x600Q85.jpg
preparing to cut the metal and a brief plan ahead of the router for the LED wirings to come.

2072435020053927514S600x600Q85.jpg]
Removal of the back part of the router to make way for the red LED backlight mod facing the Airforce turbine fan.
The tool I used here is a small needle round file that works like a saw.
2542394400053927514S600x600Q85.jpg
I think these is what I wanted.

2312201030053927514S600x600Q85.jpg
2260967990053927514S600x600Q85.jpg
trial fitting for the 3 parts, nice and cool.

2506356640053927514S600x600Q85.jpg
oki doki!!! On with the next part by part mod.


Satella Front "huge cable tie head mod"

2560314300053927514S600x600Q85.jpg
Got this huge cable tie here at our place while one cable TV company dismantle their defective cable wire with these huge cable tie holding it. The technician removing these cable tie just left it littered on our street. And I was rejoicing!!!

2570611840053927514S600x600Q85.jpg
I have so many of these in my stockpile and didn't hesitate putting it with the mod, great looking...

2759211150053927514S600x600Q85.jpg
With the black allen head screws, thing really went out excellently!!!

2237741070053927514S600x600Q85.jpg
Added big holes to accomodate the antenna bend bars. Interchangable.

2761863310053927514S600x600Q85.jpg
All holes completed, front modding will be in the end zone.

2667339230053927514S600x600Q85.jpg
I was not satisfied with the result, I put more holes, hehehehe.

Last edited by sunny (2009-10-24 16:46:18)


2343153770053927514S200x200Q85.jpg
All Mods are Pure Hand Dexterity!!!

Offline

2009-10-23 11:02:12

dremel
pcModz Bot
Registered: 2015-04-29
Posts: 8

Re: Project: Project: Satella DQ-v2 (extended mod version)



Online

#10 2009-10-24 17:07:19

sunny
Master Modder
From: Binan, Laguna
Registered: 2007-07-18
Posts: 30
Website

Re: Project: Project: Satella DQ-v2 (extended mod version)

Satella Front Led Lighting number 1 (front lit fanmod)

Unpacked my arsenals of different LEDs to create another first of the first in LED modding... let's get started!!!

2462313370053927514S600x600Q85.jpg
These LED will undergo severe test and I'll hand pick the best to be on my mod.

2157949950053927514S600x600Q85.jpg
Some of the LED that passes are now going to the circuit. I then measure the length of my sunny's led array mod.

2944341270053927514S600x600Q85.jpg
If till now you don't have an idea on how I make my sunny's led array, might as well check my "sunny's light my mod" topic.
I made the calculated distance hole to put 8 x 3mm ultrahighmegadensitypowerful led (don't exaggerate, it's how you use it).

2262517530053927514S600x600Q85.jpg
almost completed the installation. let's try.

2284258710053927514S600x600Q85.jpg
Nicely fitting, let's go ahead.

2882568630053927514S600x600Q85.jpg
All connections check and even the antenna lock and load.

2761827290053927514S600x600Q85.jpg
now face to face...

2881889990053927514S600x600Q85.jpg
Light test in front of the fan.

2388734560053927514S600x600Q85.jpg
Final look.


Satella Front Led Lighting number 2 (spotlight please)

2298941050053927514S600x600Q85.jpg
The bended rods has hole in it near the top, I put a small flashlight reflectors on all four.

2325070710053927514S600x600Q85.jpg
4 white highbrightultraextremelypowerful (over nanaman, pareho lang naman iilaw) LEDs to install.

2415282940053927514S600x600Q85.jpg
Kinabit ko as in..to the max! (ala jef)

2032562650053927514S600x600Q85.jpg
Nagatry ko as in..to the max! (ala tara)

2556485920053927514S600x600Q85.jpg
All four in, let's complete the circuit and try...1,2,3...

2175690830053927514S600x600Q85.jpg
Front mod, completos recados...

Last edited by sunny (2009-10-24 21:39:28)


2343153770053927514S200x200Q85.jpg
All Mods are Pure Hand Dexterity!!!

Offline

#11 2009-10-26 02:30:32

shamrage
Member
From: Sitio Pajo, Brgy Napnud
Registered: 2007-06-26
Posts: 261

Re: Project: Project: Satella DQ-v2 (extended mod version)

Ganda ng pagka red ng LED... parang umaapoy usok nlng kulang at lilipad na...

Offline

#12 2009-10-28 07:17:48

sunny
Master Modder
From: Binan, Laguna
Registered: 2007-07-18
Posts: 30
Website

Re: Project: Project: Satella DQ-v2 (extended mod version)

shamrage wrote:

Ganda ng pagka red ng LED... parang umaapoy usok nlng kulang at lilipad na...

Thanks Bro shamrage, nakakatamad na kasi yung fanmod na sa fan ilalagay yung led, ganoon na yun since time immemorial!! Oo nagtry ako lagyan siya ng katol, maganda rin yung effect nung nasa back na mod!!! Try ko i video!!! post ko soon.

Let the pinoy make all the difference!!! Sabi nga ng isang Mod sa Ziff Davies (para sa isang sikat na magazine), mag ipon daw ako ng 5 unusual na LED mods ko at ilalagay sa mag!!! so far may 3 na daw ako na nakita nila (ganda noon).

To continue posting after Nov. 03, 2009

Thanks for viewing.


2343153770053927514S200x200Q85.jpg
All Mods are Pure Hand Dexterity!!!

Offline

#13 2009-11-06 07:25:52

sunny
Master Modder
From: Binan, Laguna
Registered: 2007-07-18
Posts: 30
Website

Re: Project: Project: Satella DQ-v2 (extended mod version)

Will post worklog soon after my mod writing break!!!


2343153770053927514S200x200Q85.jpg
All Mods are Pure Hand Dexterity!!!

Offline

#14 2009-11-16 18:50:20

sunny
Master Modder
From: Binan, Laguna
Registered: 2007-07-18
Posts: 30
Website

Re: Project: Project: Satella DQ-v2 (extended mod version)

Project Satella : The Mobo acrylic holder support rod and at the same time the Solarpanel mod holder left and right part.

First the holes to accomodate this rod passing through inside the bucket.
2727269510053927514S600x600Q85.jpg

The rod I used, I think it's part of an old jeepney antenna I recover from one junkyard shop, I think the other part of this the rod holder is now installed with the RF antenna mod.
2065371590053927514S600x600Q85.jpg

Made it forced fitting to prevent any play on the final installation.
2631763490053927514S600x600Q85.jpg

The Solarpanel mod base with the acrylic and another cutted zoom antenna to be inserted into the rod.
2076449760053927514S600x600Q85.jpg

We're at the right path...
2211086890053927514S600x600Q85.jpg

Glued with metal epoxy both cutted zoom antennas to the main acrylic bases.
2557000750053927514S600x600Q85.jpg

Painted metallic blue pattern to look like Solarpanel and have a fuckoff (ehe printed cutout) CM logo with another UVR green acrylic at the back.
2340021380053927514S600x600Q85.jpg
2137474340053927514S600x600Q85.jpg

Summarizing it all, it ended like this, responsive to the UV Ccfl.
2419863130053927514S600x600Q85.jpg

Next - the other purpose of this rod - an acrylic mobo holder support...

Last edited by sunny (2009-11-16 19:24:29)


2343153770053927514S200x200Q85.jpg
All Mods are Pure Hand Dexterity!!!

Offline

#15 2009-11-23 12:10:12

Papang
Member
From: Cancun, Q. Roo/Mexico
Registered: 2009-10-26
Posts: 34

Re: Project: Project: Satella DQ-v2 (extended mod version)

Saludos Hermano Sunny!  I just had to drop by and say hello to my soul brother.  I saw your comment in NewModCity, thanks for dropping by!  Where can I start to get you up to date?  Well, you know I am in the final stretch for Ovni but version2.0 (the way I should have finished it, heheh) and so is my forum mate Petoscal with his improved version. About 10 days ago I got invited to help in a new forum for mods in Mexico and it resulted to be a site opened by an ex-member of my old site. Well surprise, I was named one of the webmasters!  I am not too sure of the title as we are 4 webmasters. At the beginning there were only the 4 of us, all chiefs with no indians like they say in the Old USA West. That was sort of wierd as you might understand. However, slowly we have been adding members, a lot of the active members of the old site are showing up by themselves. By themselves because the old site went down with all the e-mail adresses which we never paid much attention to because we would PM all of the time.  Not a good idea when a site goes down--you loose touch with almost everyone.
I am not even sure if this is permanent but the address is: http://modding.com.mx/index.php.

If you drop by, you will see that it is basically as the it came out of the package-basic. The forums are not organized nor is there a lot of content, that went down with the old site too, damn!  Of course it is in Spanish but you are free to post in English if you wish as a lot of the members at least know some English.  It is a secret but between us my next project will probably be a gaming balloon, yes I am not kidding!  It will not have a base but will hang like a lamp.  It is posted in my ideas page and if I can get some sort of sponsorship (fat chance, heh) it will include water cooling. Well, the sure thing to include is a mini-itx mobo , socket 775 up to the latest proc. and a pci-express x16 slot for a full sized video card (5970?? dreaming). Anyway for sure it will have more modest hardware but those mini-itx mobos are EXPENSIVE ($140USD!!).  I have never paid that much for one. But, like slipperyskip (Jeffery)  said, it sets you apart from the crowd that uses full sized components, so.....I fell for it.  Take a peek here:

http://modding.com.mx/conceptos-de-pa-p … -vt31.html

I will be making spaceship in the future a-la-slipperyskip too! But they are only some of the concepts. You are free to take any if you wish but they are "wierd" to say the least, hahah!

I was following the bad weather news up to the last one that started with an "M" which brought a lot of rain to you.  Hope all is well.

Well got to go and keep in touch, my friend. Mike


Kick butt both ways: at the office and at home with Papang BizRigs!


papangcunlogoFlagGoodMed.jpg

Offline

#16 2009-11-24 21:20:22

sunny
Master Modder
From: Binan, Laguna
Registered: 2007-07-18
Posts: 30
Website

Re: Project: Project: Satella DQ-v2 (extended mod version)

Yo mike, thanks for dropping by...yup I visited your site, holy macaroni - there's lot of modplan awaiting and in cue. hahaha, as I recall again - somebody might say, hohoho, that idea came from this blah, blah, blah. joke! I'll keep in touch Brother!


2343153770053927514S200x200Q85.jpg
All Mods are Pure Hand Dexterity!!!

Offline

Similar Topics Replies Views Last post
Project Stacker by mel12yan  [ 1 2 ]
11 12131 2014-04-20 20:54:34 by masterjun
Project: DE-350S by doki  [ 1 2 ]
12 10609 2014-02-13 12:09:47 by doki
3 2849 2013-10-09 16:15:34 by shamrage
Project: NAS by doki  [ 1 2 3 4 ]
31 23988 2013-08-15 18:55:33 by doki
Project Sasuke by Reapervon  [ 1 2 3 7 ]
52 33508 2013-08-08 20:05:00 by doki

Board footer

pcModz Ph © 2007 - 2016 All Rights Reserve.